• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Osmo Gloss Poly x on Maple Burl Bowl

Mike Brazeau

Mike Brazeau

Joined
Jun 1, 2006
Messages
347
Likes
171
Location
Freelton, ON
I have only used the Osmo Poly x on a couple of things and have been pleased with the result, applying with a piece of the white applicator pad that Osmo supply. I found it sets up very quickly and is much thicker than any of the usual oils. Basically just keep rubbing it and no real wipe off with a smooth finish that does not need buffing. I am concerned about it possibly building up in the small holes in the Burl segments. I plan on using compressed air and a nozzle to blow it out and keep rubbing as I go, maybe gentle wipe with old T-shirt cotton if needed. I think I will start on the back of the bowl. Any comments?
 

Attachments

  • IMG_4020.jpeg
    IMG_4020.jpeg
    348.9 KB · Views: 16
Mike Brazeau said:
. I am concerned about it possibly building up in the small holes in the Burl segments. I plan on using compressed air and a nozzle to blow it out
Click to expand...
That's how I handle pretty much any finish on burl or other pieces with holes or natural edge/surface. Blow it out and wipe off what comes out. Takes several blows to get it all sometimes....
 
You must log in or register to reply here.
Back
Top