powermatic 2035b outboard bed
The powermatic 3520b has a 10 in. swing. The 18 in. extention can be mounted on the tailstock end leg 9 in. below the main bed. That gives it the ability to turn a 38 in. round blank of wood. You will need the banjo extention to turn the piece, though.There is a remote tripod made by Powermatic that is independent of the lathe which allows a workpiece from the center of the tailstock to the floor, depending on the heighth of your lathe. The tripod is quite expensive, though, new. Hopefully helpful, Max, disguised as dustpan.