I made one a while back but asking if it is more efficient with bevel up or bevel down. Don't really see a difference. TIA.
-
Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Presenting a Bedan tool?
- Thread starter John Torchick
- Start date
It would depend on what you are defining as a bedan. Several quite different things are all called 'bedans'.
Only aware of one. Mine is square stock with one bevel.
Well, square stock is generally considered a "beading and parting" tool. One that tapers on the sides is considered a bedan, at least usually. I present it to the wood bevel down. I also do it the same way as I do a spindle roughing gouge. Bevel high, and then raise the handle till it starts to cut. I only use one for peeling cuts and to form a tenon on spindle blanks. Here is a link to a Richard Findley video, and he is a master at using the beading and parting tool.
View: https://www.youtube.com/watch?v=M-XSNkGGiec
Wish I could do beads like he does....
robo hippy
Wish I could do beads like he does....
robo hippy
robo hippy, I have a parting/beading tool with a double taper. Bedan has only one bevel but the sides aren't tapered. I always wondered how woodturners of days gone by were able to function with only one tool.
The French use the bedan with the bevel up. It is THE most challenging tool in the quiver, John. Cut with only the 1/16" of the edge next to the leading side, with wood in spindle orientation, cutting into side grain. Also, put on a Depends before you try it out.