• It's time to cast your vote in the April 2025 Turning Challenge. (click here for details)
  • Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Pressure pot vs vacuum chamber for alumilite resin casting

I can tell you that I didn’t wait more than 24, and possibly less than 24 hours when I took some cast blanks measuring about 1.5” x 9” to the bandsaw and it gummed up the blade and the bearings.
 
Tom Albrecht said:
I can tell you that I didn’t wait more than 24, and possibly less than 24 hours when I took some cast blanks measuring about 1.5” x 9” to the bandsaw and it gummed up the blade and the bearings.
Click to expand...
Thanks, I will wait as the instructions direct. If you hadn't said what you did I am pretty sure I would have learned the hard way.
 
You must log in or register to reply here.
Back
Top