• We are in the process of upgrading the forums today, Sunday, February 8th. The forums may be responding slowly or may be offline during periods throughout the day. This work should be finished by midday. Thank you for your patience.
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Question on River Red Gum

John Altberg

John Altberg

Joined
Oct 2, 2007
Messages
76
Likes
3
Location
Spokane, WA
I have a line on some river red gum that has been rough cut into 4"x6"x6' pieces and waxed. Current owner has had it in this condition for three years. Not sure how old it is. Anyone ever turn this? If so, I would be interested in your thoughts.


Regards,

John
 
Last edited:
I've turned quite a bit, and used it for flat work as well. Its very hard when dry, but turns ok when wet. It is very unstable and moves, checks, and honeycombs alot when you try and dry it in slabs. but usually does ok as roughed out bowls, other that deforming quite a bit during drying. It takes a high polish, and a beeswing type figure is rather common to the wood. Here is a picture of a RRG bowl I turned a while back. It's about 10" dia. Barry
 

Attachments

  • nat edge euc1.jpg
    nat edge euc1.jpg
    99.9 KB · Views: 36
  • nat-edge euc2.jpg
    nat-edge euc2.jpg
    107.8 KB · Views: 29
John, the Australian grown River Red Gum when turned dry is very rewarding, particularly the burl or the wood close to burl where it doesn't have too many bark inclusions. It can be very nice, takes an oil finish well and polishes up well, at least that is what I have found. But I usually only turn very dry pieces. It can minmise the risk of problems.


You might find it hard, but in Australia we are use to that. Use good tools ( doug thompson etc) and keep them sharp. Small tip tools can be good as you can't take too large a cut. Don't be afraid to power sand to get a good surface, if burl etc, it can sometimes be the only way.
Hope this helps.
 
You must log in or register to reply here.
Back
Top