• July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details)
  • Congratulations to James Seyfried for "NE Red Oak II" being selected as Turning of the Week for July 21, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Rotary Vacuun Adaptor

S

Steve M

Joined
Aug 20, 2009
Messages
1
Likes
1
Location
McDonough, GA
Someone has recently given our woodturning club a rotary vacuum adaptor. The shank (that goes into the headstock) is 61/64” OD and ¼” ID. Does anyone know what lathe this fits? Thank you.
 

Attachments

  • Vacuum Adaptor.jpg
    Vacuum Adaptor.jpg
    70.6 KB · Views: 14
Looks somewhat close to the adapter originally made by JT Turning tools, now made by Robust. Close, but not a match - didn’t bother to check dimensions, but the Robust/JT versions have Double bearings and a longer body.
 
Steve M said:
Someone has recently given our woodturning club a rotary vacuum adaptor. The shank (that goes into the headstock) is 61/64” OD and ¼” ID. Does anyone know what lathe this fits? Thank you.
Click to expand...
I don't think that the dimensions given are correct , 61/64" would be almost an inch as the needed opening in the spindle

And if it is 16/64" that is a 1/4" but the ID is 1/4", according given dimensions, well that does not work either.

Better get the proper dimensions, even than it might be hard to find what lathe it fits in.
 
You must log in or register to reply here.
Back
Top