• Sign up for the AAW Forum Pre-Holiday Swap by Monday, November 4th (click here for details)
  • Congratulations to Nino G. Cocchiarella for "Woven Seat Stool" being selected as Turning of the Week for October 28, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Seal the wood

Joined
Apr 24, 2004
Messages
73
Likes
0
I'm going to attack my log cache before the snow flies and cut turning blanks; Does the complete block of wood need to be coated with a sealer, or just the end-grain portions???


I plan to cut the logs in half thru the pith, or, if I miss the pith with the chain saw, cut out a thin slab containing the pith and give it to the neighbor for fire wood.

Then stack the halves in my shed, flat face down, with spachers between the layers so the cold winter air can circulate
 
Last edited:
Joined
Jul 18, 2006
Messages
643
Likes
2
Location
Central Florida
My approach is to seal any cut surface if I'm not going to work on the piece right away. I include any area where bark has been removed even if I didn't cut that area.

Ed
 
Joined
Aug 8, 2005
Messages
284
Likes
1
Location
Ballard (Seattle) WA and Volcano, Hawaii....on top
I have always been told only the end grain counts for sealing. The bulk of the moisture loss is in the end grain, and since the goal is slow, even moisture loss rather than no moisture loss that makes sense to me. I do coat branch ends as well, but those are end grain so it seems to make sense to me.

Dave
 
Joined
Nov 30, 2005
Messages
286
Likes
4
Location
Mendota IL
Gary
I am assuming you are going to take you logs, slab them out and baw saw them round so you are ready to rough them into bowls at your leisure this winter. I believe what has already been said about only end grain needs to be sealed but I coat everything round. So where the bandsaw hit it coat it. Sealer is cheap, use it!
Frank
 
Joined
May 30, 2005
Messages
278
Likes
0
Location
SW Wisconsin
I only seal the ends of the logs and half-logs. For longer term storage or drying, I'll usually seal the flat cut face with shellac to minimize checking on the surface and to slow down the invading bugs.
 
Joined
Oct 4, 2005
Messages
156
Likes
0
Location
KCMO
Website
www.zionfire.com
Frank Kobilsek said:
So where the bandsaw hit it coat it. Sealer is cheap, use it!
I think this is good advice. Bandsawing rounds exposes LOTS of end grain that didn't used to BE end grain!
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
13,016
Likes
5,422
Location
Dalworthington Gardens, TX
Website
pbase.com
The extra effort of messing with a chunk of wood and deciding what part needs to be coated and what part doesn't is ...... uh ...... extra effort. I get Anchorseal cheap enough (our club buys it in 55 gallon drums) that I just coat the whole thing and be done with it. The argument is that wood loses very little moisture through the side grain so coating with Anchorseal is not necessary. But, by the same rationale, if very little moisture is passing through the side grain, then coating it won't make any difference other than I am assured of not missing any end grain and I can get the job done faster. Besides, I never saw a cut that was made perfectly parallel to the side grain. When cutting blanks from wood like mesquite, it is next to impossible to cut a blank with any side parallel to the side grain because of the nature of the wood.

Bill
 
Joined
Apr 24, 2004
Messages
73
Likes
0
Boehme said:
Besides, I never saw a cut that was made perfectly parallel to the side grain.

Obvious!!! but I never saw it ---- there is end grain everywhere; except possibly if the cuts are exactely parallel to the grain


Thank you all for the responses!

Gary
 
Back
Top