Segmented vase with curved compound miter joints

[Bob Taylor]

I'm new to the forums, so apologies if I'm in the wrong place. If this belongs in off-topic I'll have to wait a month tp get "established"
I spent some time yesterday reading all the threads I could find that mentioned CNC. Most focused on decorating bowls after turning. Some discussed whether using a CNC is "cheating". I freely admit to being a CNC guy who cheats by using a lathe!
I wrote my own software early this year to easily sketch a stave-segmented vase with curved joints. The software create a 3d model for a single stave. I import the model into my CNC software and cut the required number of staves. After the staves are glued together I turn the vase on the lathe.
What I'd like to go through is the making of my prototype. Going in I fully expected the process to fail in some way and I'd go back to the drawing board. I needed some thick wood for the staves, and didn't want to sacrifice anything nice. My daughter was having a house built, and I rescued some 2" thick LVL scraps from the dumpster (laminated veneer lumber, used for engineered beams). Crappy stuff for turning, but heck it's just a proof of concept right? Instead it ended up being a really nice keepsake "made from the house".
At this point I'll tease the end result, and if folks are interested I'll add step-by-step posts. My ultimate goal is to share the process and my software with others, though obviously a CNC machine is required. If there are other geeks out there who'd like to collaborate on developing the process further, even better!

 

[Bob Taylor]

Zoom in on the first pic to see the lovely curved joint. Self aligning, super tight and strong!

 

[Steven Borruso]

Hi Bob ... great stave/CNC project and with the bonus of the personal connection to the piece !! I've been wanting to explore integrating turning and CNC work for awhile and finally pulled the trigger on a Sienci Altmill 4x4 CNC machine last month. Just got it the other day and still in the setup process. Have been woodworking and turning on/off for most of 50+ years along with a 40+ yr software development career .... but new to the world of CNC.

Would love to see your plans/files/etc. and collaborate on things once I get my feet wet with this new (to me) endeavor.

 

[Bob Taylor]

Thanks Steve! I looked up Sienci and your machine looks really awesome. I love the closed-loop motor system, no losing track of position when something stalls! What software will you be using? I have Vectric Aspire.

 

[Darryl Fective]

Cool piece! Yes, CNC might seem like cheating, but it does open so many possibilities. I guess if money were not a limiting factor and I could learn the programming part of it, I could see having one, but until then, (neither of which is likely) I'll remain a "purist" woodturner.

As I falling asleep last night, I was pondering what a segmented piece with compound cuts might look like. The curvature of the piece combined with angled cuts might make some interesting curves.

 

[Bob Taylor]

OK, step 1 for this project was to sketch the design of the vase in my program. I named the program "Vazier" because:
1. That sounds to me like a guy who makes vases.
2. I use beziers to draw the shape of the vase.

My goal was to make Vazier easy enough for non-technical folks to figure out and use, so it needed a GUI. My artist wife Marie was my beta tester. This screen shot is the design she drew:



The left panel has controls to set the number of segments (staves), overall height, wall thickness, and diameter of the vase, and the resolution of the 3d mesh.
Below that are 3 sliders to control the shape of the curved joint between the staves. The joint is always a sinusoid, but mapped to the surface of the mesh it takes on a nice organic feel. The sliders control the amplitude, frequency and phase of the sinusoid. No need to understand the math, playing with the sliders changes the curve in a way that's intuitive (and fun!)
Next are some stats on the overall dimensions of the vase, and the material dimensions required to machine an individual stave. If you have material you want to use for the staves, you need to make sure the model fits the material dimensions.
The dimensions are updated with every design change.
Finally there are buttons to read and save parameters, so you can get back to where you were. Saving also writes an STL file for the mesh. The STL file will get imported into the CAD/CAM software for the CNC.

The center panel is the sketch itself. You can drag any of the red dots to change the shape. If you've ever used Illustrator, Inkscape, CorelDraw etc. the bezier work the same.

The right panel displays 3d a model of a single stave as a wireframe mesh. All changes made in the control and sketch panes are immediately reflected in the mesh pane. The mesh can be zoomed and rotated in 3 dimensions.

Here's a video screenshot of me playing with the Vazier interface.

This is the vase made from Marie's design. I cut 2 staves from padauk and 2 from ambrosia maple. The final wall thickness is a uniform 5/16". I didn't need to turn the inside at all except for the visible opening at the top. Which is good, because there's now way in heck I could have hollowed that thing! The entire outside was tuned and finished on the lathe. Nice design Marie!


The actual design for my LVL vase is a lot more boring. Hey, remember I'm an engineer and it was supposed to be just a prototype!


In the next post I'll import the 3d model of this stave into Vectric Aspire, and prepare it for machining on the CNC.

 

[Steven Borruso]

Thanks Steve! I looked up Sienci and your machine looks really awesome. I love the closed-loop motor system, no losing track of position when something stalls! What software will you be using? I have Vectric Aspire.

Starting out with Vectric Desktop software but see myself upgrading to the Pro version probably sooner than later, Aspire may be a ways off ... at least for now. Opted for their gControl Panel Computer and also went with their 2.2kw, 220V spindle ... the ol' Buy Once Cry One thing kicked in (at least hardware wise).

Up to this point I've mainly thought of doing hybrid CNC/Turning along the lines of "embellishment" ... maybe glue up just a segmented top ring for a bowl, lay it flat to CNC carve a design, words, etc. into that, maybe epoxy fill and then glue that top ring to the rest of the bowl before turning. I've seen vids where people have used a CNC Rotary Axis attachment to turn spindles but wasn't that impressed I guess since that's what a lathe is for IMHO . Then again some have cut a trap door in the bed of their machine to machine larger pieces vertically and or mount a rotary axis in. Lots of possibilities out there.

Your Mr. "Vazier" app looks pretty cool .. hats off to you and Marie !! Turned out to be very nice vase. One of the things I've done when turning bud vases is to bore a 3/4" hole down the neck with a little recess at the top to accept a glass test tube ... just a thought.