• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Selling McNaughton Center Saver, Standard size

Status
Not open for further replies.
Do you have the original design that has the T shaped gate or the Mark 8 design? What blades are included in your system? Do you know approximately how many years you have owned the system? The reasons for my questions are that McNaughton has evolved the design of the system over the years so blades aren't may not be exactly the same if someone currently owns a McNaughton system and wants to augment the set that they currently have. Also, depending on where you bought the set, it might not have included the straight blade along with the three curved blades.

I would recommend including either an email address or a phone number for people to contact you. The reason is that a lot of potential buyers may not be members of this forum.
 
Bill Boehme said:
Do you have the original design that has the T shaped gate or the Mark 8 design? What blades are included in your system? Do you know approximately how many years you have owned the system? The reasons for my questions are that McNaughton has evolved the design of the system over the years so blades aren't may not be exactly the same if someone currently owns a McNaughton system and wants to augment the set that they currently have. Also, depending on where you bought the set, it might not have included the straight blade along with the three curved blades.

I would recommend including either an email address or a phone number for people to contact you. The reason is that a lot of potential buyers may not be members of this forum.
Click to expand...
Good questions, good advice. First time using the forum.
Bought the equipment from Craft Supplies about a year ago, with three blades, no straight blade. It just has a square gate, not at all like the one Mahoney uses. Assuming then it's the Mark 8 system but could go to jail for lying if it isn't. Contact me at buckarew4491@yahoo.com
 
Status
Not open for further replies.
Back
Top