• June 2025 Turning Challenge: Turn a Wand! (click here for details)
  • Sign up for the 2025 AAW Forum Box Swap by Monday, June 30th (click here for details)
  • Congratulations to Carl Ford for "Rings of Raindrops in Living Color" being selected as Turning of the Week for June 16, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Sorby Ring Hollowing tool

C

Clint5699

Joined
Feb 25, 2008
Messages
18
Likes
0
Location
Forrest City, Arkansas
Any one out there have experience sharpening the Sorby Ring Tool ? The bevel is on the outside of the ring and awkward to grind evenly. Your suggestions will be greatly appreciated. This is a great tool for end grain hollowing, hope we can find a good solution. :confused:

Thanks,

Clint
 
I don't have the sorby tool but I sharpen all my ring tools with a white grinding wheel I purchased for the Dremel and only sharpen the inside. I put the grinder in my drill press and made a wooden jig to hold the ring tool. Then I just crank lay it on the drill press and move the grinder inside the ring. Then I just move the ring around so the grinder hits all of the inside.
If necessary I will hit the outside with a diamond hone by hand.
 
Sorby ring tool

Thanks Richard and John for your help with this. The Sorby site was most informative and this is what I will do.

John , may I ask what kind of tools you have ? I also have the Oneway Termite which sounds similar to yours.

Thanks again for your responses .

Clint
 
Clint I have the Oneway ring tool and a homemade one as well as some homemade hook tools. However since I started using the Hunter tool I probably will not use the others again. The Hunter tool cuts just like my ring tools but doesn't ever need sharpening.
 
You must log in or register to reply here.
Back
Top