An friend of mine has a 14 inch Steele City Bandsaw with granite table. Recently he broke both trunions while moving it and cannot find parts. Anyone have or know of parts for this saw?
-
Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details) -
Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Steele City Bandsaw parts
- Thread starter Gerald Lawrence
- Start date
-
- Tags
- bandsaw parts steele city
When I needed parts for my Steel City bandsaw, the company was belly-up but the web site was still up. This was a 5 years ago. I emailed customer service and was directed to this gentlemen (formerly with Steel City):
Terry Ross
Nordis
520 Thompson Drive, Unit 3
Cambridge, Ontario
N1T 2K8
Fx: 519-624-2222
T/F: 1-877-724-8665
terry.ross@nordis.ca
www.nordis.ca
He had the parts I needed on hand.
My understanding is Steel City was started by former executives from Delta Machinery. I wonder if any Delta parts are interchangeable or similar enough to be adapted.
Good luck.
Terry Ross
Nordis
520 Thompson Drive, Unit 3
Cambridge, Ontario
N1T 2K8
Fx: 519-624-2222
T/F: 1-877-724-8665
terry.ross@nordis.ca
www.nordis.ca
He had the parts I needed on hand.
My understanding is Steel City was started by former executives from Delta Machinery. I wonder if any Delta parts are interchangeable or similar enough to be adapted.
Good luck.
I think there would be a higher likelihood of some Grizzly parts matching the Steel City compared to Delta. But that is just a guess, never heard of anyone using Grizzly for that.
Thanks for the info
john lucas
AAW Forum Expert
I don't believe their machines are anything like Grizzly. I own one of their jointers. when I bought it there was a broken bed. Actually I bought 2 and both had broken beds but one was an outfeed and one infeed so I knew I could make one good jointer. I found a site where I ordered replacement beds. That was well over 5 years ago and have no idea if that site even exists. Steel City was out of business when I purchased them. Try doing a search for Steel city tool parts.