Been lurking here awhile. Getting a Delta 46-460 next week. Need some insight on where to get tools and pen kits to start. Thanks for any assistance.
-
July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details) -
Congratulations to Kent Reisdorph for "Sugarberry Bowl" being selected as Turning of the Week for July 14, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Ted Hollenbach
- Thread starter Ted Hollenbach
- Start date
- Joined
- Feb 6, 2010
- Messages
- 3,370
- Likes
- 2,431
- Location
- Brandon, MS
- Website
- threeringswoodshop.square.site
Welcome to the crew. Tools there are lots of places.
https://thompsonlathetools.com/ is my choice for gouges
https://www.woodturnerscatalog.com/ is a good place for kits and tools
https://www.packardwoodworks.com/ Also a good tool place
As to pen kits there are lots of places and most of the ones I have came from Woodcraft
If you have more specific questions after you look just chime in. You also might want to look for a club near you and get direct advise and demos to watch probably on Zoom right now.
https://thompsonlathetools.com/ is my choice for gouges
https://www.woodturnerscatalog.com/ is a good place for kits and tools
https://www.packardwoodworks.com/ Also a good tool place
As to pen kits there are lots of places and most of the ones I have came from Woodcraft
If you have more specific questions after you look just chime in. You also might want to look for a club near you and get direct advise and demos to watch probably on Zoom right now.
- Joined
- Jan 27, 2005
- Messages
- 13,127
- Likes
- 5,623
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
Welcome to the AAW forum, Ted. Here are a couple more places to get pen making supplies:
Penn State Industries
Berea Hardwoods
Penn State Industries
Berea Hardwoods
Penn State also has a line of very acceptable value priced tools, Benjamins Best. The M2 steel is good. They also have a lot of pen making accessories. I am not a fan of their Barracuda chucks though. You will need a way to sharpen tools.
Welcome to the forum. I'm fortunate to have a Woodcraft store nearby. Penn State offers more of a selection of specialty pen kits. Doug is correct, you need sharp tools.
Welcome to the Forum. You will get a better response if you post this on the general woodturning sub-forum. This one is mainly for introductions. We would like to hear a bit more about you..
Welcome to the Forum, Ted. I agree with all the above on Pen supplies. You will enjoy pen making Ted and it's a good place to start. I made pens for several years then I progressed to making bowls, vases and other items. You will get a great deal of knowledge from some of the country's most talented turner's.