I bought lathe by thayer & houghton of worcester mass. it has grease cups what kind of grease should I use? Does any body know any thing about this lathe?
Ed
jarvis89@hotmail.com
Ed
jarvis89@hotmail.com
-
July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details) -
Congratulations to Kent Reisdorph for "Sugarberry Bowl" being selected as Turning of the Week for July 14, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
thayer, houghton & co makers worcester, mass
- Thread starter Ed Jarvis
- Start date
jarvis89 said:
Any good automotive grease should work. As the owner of an Atlas drill press w/grease cups I bought a one pound tub of grease at my local autoparts store. I fill the cups (top caps) and thread them onto the lower portion about one full turn. About every three months, more often if the press has been used heavily, I give the caps half turn to add grease to the bearings. Too much grease will cause all sorts of dripping and staining problems, so use moderation.