• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • April 2026 Turning Challenge: Salad Bowl! (click here for details)
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Gianni Di Gregorio for "Simple Piercing" being selected as Turning of the Week for April 20, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Thompson Gouges with SB Handles

Status
Not open for further replies.
Jim McLain

Jim McLain

Artist
Joined
Apr 7, 2011
Messages
299
Likes
2,208
Location
Socorro, New Mexico
Website
www.lucadecor.com
I have two Thompson V gouges that see little use that I would like to sell. The 5/8 gouge is V15 steel and comes with a 20 inch Stuart Batty handle. If it were the v10 steel that Doug usually sells it would retail for $193.50. Doug charged a premium for the v15 when it was offered but not sure how much. The 1/2 gouge is the v10 steel with a 12 inch Stuart Batty handle. It retails for $148.50 new. Total value is $342.00. Will sell them both for $240.00 shipped.



Jim McLain
575-517-6535
Jasjmclain@msn.com4F493025-B128-49AE-8A4F-B7D8049C7D55.jpeg5EE560AE-5105-40DF-A55C-D83D35F63DF8.jpeg1F368CCA-6343-4C75-8917-3353C976811E.jpeg99765ED4-2018-4885-9BED-551C8F3E0419.jpeg89D047EA-C74E-4BBA-A317-E981964E32C2.jpeg5B80A677-9650-4FDA-A8A5-237317D9D5F1.jpeg
 
Status
Not open for further replies.
Back
Top