• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Thread chasers 12 or 10 tpi.

Status
Not open for further replies.
Andrew Hobbs

Andrew Hobbs

Joined
Jun 2, 2024
Messages
38
Likes
14
Location
Jupiter, FL
If anyone has any thread chasing tools I am in the market. I'm looking to buy new i just thought I would ask here first.
Thanks!
 
Thank you!
I do anticipate doing a lot of them but my next big purchase has to be a lathe before my 22in swing grizzly bites the dust. It's old, and beat up but its variable speed goes down to almost zero and it's 3hp so it technically does everything I need it to.
 
Status
Not open for further replies.
Back
Top