• Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Threaded Drive Center?

S

saepperson

Joined
Nov 24, 2004
Messages
2
Likes
0
Location
Augusta GA
I have an AMT lathe which I got used. Since I am still learning turning, it works fine for me. Problem is, there is no morse taper in the head stock (and beleive me, I've looked). The spindle threading is 3/4" x 16 tpi, so I haven't had trouble finding chucks. But I haven't found any pronged drive centers that are threaded. I have one that came with it, but would like a back-up. Does anybody have any suggestions? thanks
 
Threaded spurs are around, I believe saw them in the recent PSI catalog, but if you have a name brand chuck you are better off getting a spur insert for it as they are available for most chucks. I will say that threaded spurs can be a bear to remove some times.
 
You must log in or register to reply here.
Back
Top