• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Turning non wood materials

S

Sebastian Montagano

Joined
Sep 8, 2021
Messages
10
Likes
442
Location
Jenkintown, PA
I have seen online how people turn bowling balls. They are extremely cheap on eBay and other used places, but through my research I realized they can be dangerous. Some materials in vintage bowling balls can be extremely hard and sometimes toxic. I was wondering if anyone had experience in doing this, or could tell me a good bowling ball to turn that will be safe and not to hard.

Thank you very much,
Sebastian
 
Sebastian Montagano said:
I have seen online how people turn bowling balls. They are extremely cheap on eBay and other used places, but through my research I realized they can be dangerous. Some materials in vintage bowling balls can be extremely hard and sometimes toxic. I was wondering if anyone had experience in doing this, or could tell me a good bowling ball to turn that will be safe and not to hard.

Thank you very much,
Sebastian
Click to expand...
Sorry, although I've turned a lot of unusual materials, a bowling ball isn't one of them. But they are plastic, and plastic generally turns very nicely. Are bowling balls uniform all the way through? That's something I'd be concerned with.
I hope you come back with any progress on this.
 
Mark Jundanian said:
Interesting that the core is not spherical.
Click to expand...
Doesn't have to be, so long as it is balanced and weight controlled (they compensate for the average amount of material lost in drilling for finger holes). Many moons ago, I worked at a bowling alley that was tied to a pro shop where we did our own drilling. In those days, balls were made of hard rubber and composites, and an undrilled ball out of the box from the factory would not roll straight until we drilled them.
 
I've turned several different brands of solid surface countertop material. It turns and polishes up nicely though some will wear your tools down more quickly.
 
You must log in or register to reply here.
Back
Top