-
It's time to cast your vote in the February 2026 Turning Challenge. (click here for details) -
Congratulations to Gabriel Hoff for "Highly Figured Masur Birch Round Bottom Box" being selected as Turning of the Week for March 2, 2026 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Vacuum pump filter
- Thread starter Finn Posner
- Start date
Following. My little filter is not really adequate.
A lot of people use some sort of fuel line filter. Here's what I use in my vacuum system:
The fuel line filters are a common suggestion, and seem to work well. My system was assembled for vacuum baggin and when I put it together I got something from Veneer Supplies (they sell all the parts needed for vacuum bagging) to use on my pump.
I also use inline fuel filters from NAPA Auto Parts (I think it’s part number 3001) and costs about $7 each. They work and are cheap/easy to replace.
I mounted a Dust Deputy to a 55 gallon drum lid, ran Flex Tubing from that to my vacuum pump, which I set on top of a filter cabinet that I made to support the pump and the nylon bag that came with it. I use a 1hp portable dust collector that I purchased from Harbor Freight. I will adapt a 2 HP to it eventually. I have .3 micron HEPA filters in the cabinet that I made. So far, I haven't had to change the HEPA filters yet. The bag rarely needs emptying. I remove the debris from the drum by using a lobby pan and a small long handled broom.
I have one like that. I got the Gast B300A Filter Muffler, 1/4″ NPT threaded fitting. And then two dust filters at intake and bleed valve with fuel filter like a Fram G2 with the 3/8" fittings for tubing.
Tom Gall
TOTW Team
@Finn Posner These might also work for you. Just need a 1/4"NPT nipple and a hose fitting of your choice.
McMaster-Carr
MSC Direct
McMaster-Carr
MSC Direct
- Joined
- Jan 27, 2005
- Messages
- 13,213
- Likes
- 5,816
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
Like others, I use a fuel filter from Napa. Cheap and clear so you can see when to replace it. So far I haven't needed to.
Russ Braun
TOTW Team
Replace it? What a novel idea, lol!!
Seeing this thread got me checking my Gast as its been many years since I installed it. I did install an an in-line filter (that needs cleaning) and then I discovered that the pump has two built in filters under the large black plastic screws on the end.
Joe Woodworker, Veneer Supplies and vacuum pump expert,
(https://www.veneersupplies.com/)
recommends this one:
www.veneersupplies.com
I purchased this and many other vacuum-related parts from him. And he's a nice guy.
(https://www.veneersupplies.com/)
recommends this one:
High-Flow Vacuum Pump Filter with 1/4" NPT: $16.90
This vacuum filter is perfect for the vacuum press systems we offer and can handle up to 10 CFM of vacuum flow. Each filter comes with a micro-mesh particle filter made of stainless steel.
www.veneersupplies.com
I purchased this and many other vacuum-related parts from him. And he's a nice guy.
My experience with vacuum pumps was in metal machining using liquid cutting fluids with a Gast oil less pump. The issue there is to use a water filter. Any water turns the pump into a fog generator which at first seemed kinda cool. For some reason any liquid caused the pump head to get extremely hot, way too hot to even touch it.
First time it happened the pump seized up. Thinking it was ruined the pump was replaced. Before trashing the seized pump one more try and it seemed to work as good as new???
First time it happened the pump seized up. Thinking it was ruined the pump was replaced. Before trashing the seized pump one more try and it seemed to work as good as new???
With good results, I've used cheap auto air filters, but they're a minor hassle to replace, as you have to get the filter unit unplugged from the tubing, maybe losing an inch of tubing each time. The unit suggested by John is a wee bit more expensive, but allows you to unscrew just the housing to clean or change the filter without taking the unit out of the tubing. I like it. If the filter is steel mesh, as implied, rather than paper, it could be cleaned a few times without replacing, which would make it cheaper than auto filters!Joe Woodworker, Veneer Supplies and vacuum pump expert,
(https://www.veneersupplies.com/) recommends this one:
High-Flow Vacuum Pump Filter with 1/4" NPT: $16.90
This vacuum filter is perfect for the vacuum press systems we offer and can handle up to 10 CFM of vacuum flow. Each filter comes with a micro-mesh particle filter made of stainless steel.
Didn't realize cost was an issue with the tubing. Think it was around 35 cents a foot at ace hardware when I put my system together 3-4 years ago.
Tom Gall
TOTW Team
@Dean Center , @Sam Fleisher
I've always used 3/8" air hose on my vacuum system (since 1994) with quick-connect fittings at all attachment points.
I've always used 3/8" air hose on my vacuum system (since 1994) with quick-connect fittings at all attachment points.
This is my Gast oilless vane pump. The filters, inlet and outlet came with the unit from Gast. They install in the inlet and outlet ports that show on your pump. The ports should be marked with “in” and “out” cast near the port. The black pipe that you see on my pump was needed to change the position of the filters to fit a previous installation. These should be available from Gast or as used parts on EBay.
Edited to correct autocorrect.
Edited to correct autocorrect.
Attachments
I use a spin-on oil filter.
Tim
Tim
It's not the cost of the tubing, it's that about half the time, you have to cut off an inch of tubing to get the old filter off, and eventually the tubing gets too short, you have to go find some new tubing, and redo additional connections to get it replaced. It's a hassle and time waste more than an expense. (I use polyethylene tubing) For cheap, I was referring to the simple auto air filters.