I currently have and use, a ”Hold Fast” vacuum generator and it works just fine. I’ve been thinking of switching over to using a dedicated vacuum pump I could locate closer to my lathe. Also, I would not have my compressor firing up to fill the tank, even though the tank is large enough to handle the vacuum generator’s requirements.
I see a lot on Amazon for sell but I am not sure which type I should be look at. It seems the ”oil” type are the least expensive but can spew oil about the shop when used of an extended period of time.
I would appreciate any advice offered.
Brian
I see a lot on Amazon for sell but I am not sure which type I should be look at. It seems the ”oil” type are the least expensive but can spew oil about the shop when used of an extended period of time.
I would appreciate any advice offered.
Brian