• Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Vicmarc VL100, looking for data, user manual

Fred Van Etten

Fred Van Etten

Joined
Jul 30, 2019
Messages
13
Likes
1
Location
Roswell, GA
A friend was gifted an old and badly abused Vicmarc VL100 lathe. Nameplate shows serial number 644, manufactured in 1997, sold by CraftSupplies USA (stamped on the nameplate!). It looks like a “Frankenstein lathe” - see photo. Large motor cobbled onto the backend. If anyone has info on original motor specs, photos of an “intact VL100” and/or an owners manual or anything else that would help in rebuilding, I’d appreciate. I’ve suggested my friend email Vicmarc (their website has owners manuals but not for the VL100) and - long shot- CraftSuppliesUSA. He’s a new turner and not yet a member of any turning organizations. Thanks
 

Attachments

  • IMG_6051.png
    IMG_6051.png
    4.2 MB · Views: 14
I have the catalog listing for it from a 1998 Craft Supplies Catalog. If you need replacement bearings or a spindle, branchestobowls.com has them.
 

Attachments

  • 20260205_185226.jpg
    20260205_185226.jpg
    348.4 KB · Views: 7
  • 20260205_185205.jpg
    20260205_185205.jpg
    352.5 KB · Views: 6
The Vicmarc VL100 is what every clone wished it could be. I should know- I replaced a Jet 1014 mini with the VL100. I built a bare lathe version with a 3/4hp Leeson DC motor and Minarik drive, a wonderful combo. I only sold it, regrettably, when my VL200 came into my life. I tracked it down a couple years ago, and it wasn't going to be let go. Fred, I hope you can restore it to its former glory.
 
You must log in or register to reply here.
Back
Top