• December 2025 Turning Challenge: Single Tree! (click here for details)
  • Congratulations to Bob Henrickson, People's Choice in the November 2025 Turning Challenge (click here for details)
  • Congratulations to Steven Gordon for "Dropped Ice Cream Cone" being selected as Turning of the Week for December 8, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Vicmarc VM120 105 mm jaws

Status
Not open for further replies.
Kent Jaffrey

Kent Jaffrey

Joined
Mar 17, 2019
Messages
205
Likes
221
Location
Warrenton, Virginia
This is a little used set of 105mm (4”) jaws for the vm120 chuck. these are the style with no scre holes affecting the jaw profile. This is good for not damaging tenons, but means they don’t open as far as normal so they don’t quite get large enough to cover the lower range of the 5” jaws.

$55 including shipping in continental US.
IMG_2074.jpeg
IMG_2076.jpeg
 
Hi Kent , if they are still available I am interested. It’s a gap in my range that would be helpful. I’ll send a pm.
Chris
 
Status
Not open for further replies.
Back
Top