• July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details)
  • Congratulations to James Seyfried for "NE Red Oak II" being selected as Turning of the Week for July 21, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Video on Oneway chuck maintenance?

B

Bob Slocum

Joined
Nov 3, 2008
Messages
19
Likes
29
I have a 30 year old Oneway chuck ( w tommy bars) that has become stiff and hard to open/close. Can you recommend a video that shows how to disassemble for cleaning/lube?
 
Before disassembling, have you tried blowing out well and then spraying backside liberally, and openings from the top, with Boeshield, or WD40, etc?
 
I do what @Ron Solfest says. Wd 40 & air.

If that doesn’t help
I attached the manual. Page 11 has the disassemble instructions.

You may only have to take out the jaw slides. Be sure to keep them in order as they come out.
Mark where the last one came out. Put them back in reverse order starting where you marked.
I think the slides are numbered but they might not be readable.

If the chuck is working ok with the slides out, I’d just clean the treads and put it back together.

Otherwise the rest is just two steps. Take out the adapter use the holding screws in the jack screw holes.
Then use retaining ring pliers to remove the retaining ring.
 

Attachments

You must log in or register to reply here.
Back
Top