An unexpected person that enters your shop can be dangerous. Do any of you have something to alert you?
-
Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details) -
Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Visitor alert
- Thread starter Webb Willmott
- Start date
My wife, children, and grandchildren all know that if I am running machinery not to startle me or approach me until I have turned it off. Any stranger walking through my door has other things to worry about.
I’ve used a cow bell on the entry door of two past shops for just such reason.
Tim
Tim
Isolation works for me.
I don't but I wish I had something. I live in a rural area so the only visitors I've had (to date) were family members, but I'd still like to have some kind of alwarm to let me know they came in. Probably some kind of flashing light since the tools might drown out an audible alarm if they're running.
- Joined
- Feb 28, 2021
- Messages
- 1,816
- Likes
- 1,627
- Location
- Roulette, PA
- Website
- www.reallyruralwoodworks.com
I'm deaf so I have my workshop organized so that whenever I am working at any tool or workbench, the shop's man door is within my line of sight... I have peripheral vision that is slightly beyond 180 degrees too.. I've had some call it a "sixth sense" that I have to know when someone's behind me... (its hard to sneak up on me!)
Only visitor would be my wife. When I first started turning, she came in while the lathe was on and tapped my on the shoulder. I told her not to do that again unless she wanted to call 911. Told her to stand off to the side where I could see her. I would know if family was coming and cease anything in the shop to visit.
- Joined
- Jul 18, 2018
- Messages
- 1,389
- Likes
- 3,078
- Location
- Baltimore, MD
- Website
- loujacobswoodturning.com
My wife was quite hearing impaired for a long time. Five or six years ago she had two cochlear implants which were life changing for both of us. But we had developed a habit that if I wanted to get her attention without startling her, I’d flash room lights. She similarly does that if she comes into the shop while I’ve got something running. It’s a very quick flash, and the switch is right by the door. That works for us.
Well, an old trick, flick the light off and on. That lets you know.
robo hippy
robo hippy
I keep a bright flashlight at the door. It has a very tight beam. When someone enters they shine the light onto the wall just at the edge of my peripheral vision and wiggle it. I see a bit of a flicker which I do not find startling. I find it gentler than the room light flashing.
I lock the door.
A shop keeper’s bell would be fine most of the time but still pondering times when cabinet saw in use.
No unexpected person has ever entered my shop.
I startle easily, so like Mark, I lock the door when I'm doing something that might be hazardous if I'm distracted, such as cutting up logs sections on the bandsaw.
I also have two remote driveway monitors on the inside and outside of the security gate so I know if a car is going out or coming in. If I'm expecting a visitor and have given them the access code or a friend comes, the incoming monitor alert gives me time to shut things down and greet them at the door. Works for me.
The distraction factor also applied to pets.
JKJ
Do you know why a person gets startled?…
Tim
Tim
I know the textbook descriptions. For me, it's really less of being actually startled than the momentary distraction when concentrating. I mention this in my bandsaw video.
When turning in front of an audience I find random interruptions are expected and not distracting.