I am looking for an original Woodfast Faceplate that is 3" with a 1 1/4" X 8 TPI that was imported to the US in the late 1990's to early 2000's. I need the deep nut on the threaded end.
I need the deep nut on the threaded end.
Odie: The original faceplate has two flat spots to mate with the Woodfast wrenches that is approximately 1 inch. The faceplate that Rikon has to be used with there updated version of the Woodfast lathe is just over 1/2". I need the faceplate with the 1" flat spot. Thanks.