• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Why I wear a face sheild

Nice picture N7BSN (whatever that name means). I wear a faceshield for exactly the same reason. I've seen and heard of too many true stories over just the past 4 years to keep me turning safely and cautiously. I hope the vase blowout didn't cause any personal injury.
 
Griesbach said:
Reason enough for sure. :eek: Do you know why this one blew up and was there any damage to your Trend?
Click to expand...

The wood is Paulowinia, and it's the last time I'll turn with it. It's a very soft wood (originally from Korea/Japan) and the catch was a good inch from the shattered area.

Fortunately the wood was all that failed.

Jeff.. n7bsn, is my ham-radio call-sign With that I can be tracked down almost anywere.

TTFN
Ralph
 
ouch!

I have an Airshield and I am sure it saved me a trip to the ER when a chunk came out of the chuck and hit me in the air filter area. I now have a crack in the plastic housing but everything seems fine. Just before I had that happened I thought about bring the tail stock up. I should have trusted my instincts.

Todd
 
I use the guard on my PM when turning ANYTHING I/m not sure of, in addition to a Trend system. I don't know if it's paranoia or old age. I'm not sure if my body can stand a high speed hit from 15#s of spinning wood. Just my thoughts,

Jim
 
Face Shields

Glad to hear you're okay.

I wear a hard hat and face shield when turning. I haven't upgraded to filtered air yet, but I keep wondering just how much the shield will really save me. The shield isn't supported below my chin, so a large block will still impact my face, it just won't tear it up as its breaking bones.

I'm considering moving to a hockey mask style instead because the shield will be more rigid if a large piece comes off or a blank flies loose.

Any thoughts?

Brodie
 
quote "I'm considering moving to a hockey mask style instead because the shield will be more rigid if a large piece comes off or a blank flies loose."

Brodie,

My friend turns with a hocky mask and loves it.
 
Sports masks

I looked at hockey masks, etc. last year, but they all were too small for me, and I don't have any padding on the top of my head. The only thing that fit was a baseball catchers/umpires mask. It's heavy and it won't stop the small stuff but it is strong enough to stand up to the big pieces.
 
Absolute believer in wearing protective equipment, though I don't like it! Was cleaning out an hvlp gun in the cabinet shop the other day with lacquer thinner, and the toothbrush I was using to scrub with flicked a nice sized droplet of lacquer thinner *directly bullseye* into my left eye. Pain pain pain. Make a grown man cry like a grown man with lacquer thinner in his eye. Fortunately I hit the eyewash IMMEDIATELY while washing my hands at the same time to yank out my contact lense. I consider contact lenses WONDERFUL things because the lens absorbed the thinner rather than my cornea absorbing it. Flushed my eye well for several minutes and all was well.

Now when I have a squirt bottle of lac thinner in my hand, safety glasses are in the other hand.
 
Redfish said:
Absolute believer in wearing protective equipment, though I don't like it! Was cleaning out an hvlp gun in the cabinet shop the other day with lacquer thinner, and the toothbrush I was using to scrub with flicked a nice sized droplet of lacquer thinner *directly bullseye* into my left eye. Pain pain pain. Make a grown man cry like a grown man with lacquer thinner in his eye. Fortunately I hit the eyewash IMMEDIATELY while washing my hands at the same time to yank out my contact lense. I consider contact lenses WONDERFUL things because the lens absorbed the thinner rather than my cornea absorbing it. Flushed my eye well for several minutes and all was well.

Now when I have a squirt bottle of lac thinner in my hand, safety glasses are in the other hand.
Click to expand...
Shouldn't the safety glasses be on your head instead of in your hands?

73's KB9POU/N7BSN
 
You must log in or register to reply here.
Back
Top