-
Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details) -
Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details) -
AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
-
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Winged Bowl
- Thread starter Sean Boyle
- Start date
Sean,
The lid is not helping; too dark and far too large.
The lid is not helping; too dark and far too large.
- Joined
- Apr 27, 2004
- Messages
- 9,313
- Likes
- 6,095
- Location
- Lakeland, Florida
- Website
- www.hockenberywoodturning.com
These are tough shapes to do well.
Great work for an early try.
The surface looks nicely done.
Consider a thin lid. I like lids that continue the curve of the form.
Steve Worcester
Admin Emeritus
Did you do this with waste wood, or as a rectangle?
with the wings being thinner towards the center, you get flex at that point, work the wing thickness down from the outside towards the center and you will get the walls thinner. Don't like the lid as the others say, or the Jammie pants.
with the wings being thinner towards the center, you get flex at that point, work the wing thickness down from the outside towards the center and you will get the walls thinner. Don't like the lid as the others say, or the Jammie pants.
A nice bowl without the lid or a box with the lid But I also don't think the lid of the box looks right as said a light lid with a finial would set it of
.not to late to change it and make it into a great box. Just my thoughts 1 persons opinion.
Ian
.not to late to change it and make it into a great box. Just my thoughts 1 persons opinion.
Ian
- Joined
- Jan 27, 2005
- Messages
- 13,209
- Likes
- 5,813
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
I believe that the variation in thickness isn't as great as the pictures seem to show, but a straight cut intersecting a curved surface can create that illusion. There are a couple ways to deal with that. One is to have the edge a constant width while the thickness varies. The other is to change the shape of the wings so that the curve is more gentle and continuous from end to end. I would favor the second one because continuous curves serves to unify the whole piece while the first option results in separate elements joined together.
If I were to turn a winged box with wings that have a continuous curve, I would also reflect that same curve inverted to shape the box and also in the curvature of the lid.
If I were to turn a winged box with wings that have a continuous curve, I would also reflect that same curve inverted to shape the box and also in the curvature of the lid.
