• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Wood Movement

Dave Fritz

Dave Fritz

Joined
Jul 24, 2008
Messages
764
Likes
222
Location
Montfort, Wisconsin
I'm trying to make pepper mills similar to the one in the craft supply usa instruction sheet using a shaftless crushgrind mechanism. https://www.woodturnerscatalog.com/p/53/5242/CrushGrind-Click-In-Mill-Mechanism Mine is different in that the top and the bottom flow together in one line. Everything was lined up great until I started putting the finish on and I suspect the wood moved. Now the two pieces don't line up anymore all the way around the mill.

I guess that's why a bead or some other detail at the junction of those two parts is used, to cover up any wood movement?
 
Last edited:
If you left the inside of the pepper mills unfinished which is usually done the changes in the RH can cause a change In the wood's dimensions.

I sort of think It could also be that the stock was not quite as dry as you thought.
I usually give my small "dry" pieces a microwaving zap before final turning.
A,microwave zap after drilling might do wonders.

The detail at the joint will hide a mismatch in the joint as well as a slight movement of the wood.

Be sure to use straight trained wood. Figured wood will move unevenly.
Regardless The wood should line up when the grain is lined up. Most of us have boxes where the lids only fit when the grain is lined up.
Be sure to have the grain aligned when you turn the two parts together so that they can move together. If you do this a change in dimension will show when the top is turned 90 degrees and not show when the top is aligned.

If you turn the mills from small limbs driling the pith out, the wood movement would similar in all directs and unlikely to be noticed.

In many of today's the homes the RH is controlled to be near 50% most of the year so wood movement should not be an issue for these customers.

Also an epoxy finish inside and out would make a moisture seal.
But I would rather just have the pieces line up when the grain is lined up
 
Last edited:
You must log in or register to reply here.
Back
Top