• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • March 2026 Turning Challenge: Olla! (click here for details)
  • Congratulations to David Wyke, People's Choice in the February 2026 Turning Challenge (click here for details)
  • Congratulations to Tim Connell for "Black Locust Basket Illusion Series #4" being selected as Turning of the Week for March 16, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Wood turning capabilities?

John Torchick

John Torchick

Joined
Jan 24, 2010
Messages
3,287
Likes
1,011
Location
Cleveland, Tennessee
Not sure if that is the right question. I have a stash of dried wood that is begging to be turned. Had a bad experience today in turning a piece of redwood. Even with a new Hunter Viceroy #1, there was horrible tear out. Is there any publication or chart that refers to what is bad/good/best/better for turning?
 
John Torchick said:
Not sure if that is the right question. I have a stash of dried wood that is begging to be turned. Had a bad experience today in turning a piece of redwood. Even with a new Hunter Viceroy #1, there was horrible tear out. Is there any publication or chart that refers to what is bad/good/best/better for turning?
Click to expand...
Generally the denser woods are easier to slice or scrape. For a clean surface, most softer woods need to be sliced with well sharpened tools. Any book that tells about the density of the woods that you're interested in using will be very useful. Dry redwood and western red cedar will give you immediate feedback about your tools and turning technique.
 
I understand that you have a good supply of dry wood, but you might be better served by turning green wood first. You will find it more forgiving and possibly more fun. I would also suggest that you find a local mentor or club to help you with your walk. It will speed up your learning curve
 
John Torchick said:
Not sure if that is the right question. I have a stash of dried wood that is begging to be turned. Had a bad experience today in turning a piece of redwood. Even with a new Hunter Viceroy #1, there was horrible tear out. Is there any publication or chart that refers to what is bad/good/best/better for turning?
Click to expand...

Redwood and other soft woods can be challenging. Sharp/sharp/sharp (a new Hunter #1 should be sharp - don't forget to rotate it randomly on occasion).

With softer woods I like higher speeds, slow tool movement. I assume you experimented with the edge presentation, direction of cut relative to the grain, etc.

Also, soaking the surface of a soft wood with some kind of sander sealer can stiffen the fibers a bit for perhaps a cleaner cut. Might have to reapply and let dry between cuts.

Question: turning what? Spindle, face grain?
Having someone else look over your shoulder and try cuts with different tools can be helpful.

JKJ
 
First if all take very light cuts as the final passes. Slow down how fast you push thevtool through the wood. The Viceroy does a pretty good job when taking light cuts. For the ckeanest cuts use the Viceroy as a bevel riding tool. Even used like that the important thing is light final cuts and not pushing tge tool faster than tge wood wants to be cut. I have a video on using the Viceroy but dont know how to post links on this site. Go tou YouTube and type in johnlucaswoodturner/viceroy
 
John Lucas, have viewed your Viceroy video several times. Will put a piece in the lathe and try again. I have a copy of the Janka scale which gives the hardness of a bunch of wood species.
FWIW, I was turning a 3x3 piece with end grain. Can cut a longer piece and cut cross grain for funsies. Thanks to all.
 
You must log in or register to reply here.
Back
Top