• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

WTB Vicmarc VM100 or 120

Status
Not open for further replies.
Ordering direct from Vicmarc is much cheaper than from US/Canada retailers even with taxes and custom duties added. Plus the direct thread versions are in stock. Shipping seems to take about two weeks with the added customs delay now.
 
Roger Wiegand said:
Ordering direct from Vicmarc is much cheaper than from US/Canada retailers even with taxes and custom duties added. Plus the direct thread versions are in stock. Shipping seems to take about two weeks with the added customs delay now.
Click to expand...
I just checked and it’s about $350 with taxes, delivery, and tariffs. I can order from craft supplies for $289. Possible I missed something!
 
Per
Matt Friedman said:
I just checked and it’s about $350 with taxes, delivery, and tariffs. I can order from craft supplies for $289. Possible I missed something!
Click to expand...
Perhaps you didn't change the currency from Australian to US dollars? The one (VM120 no jaws) I just bought was $332 from Craft Supplies and $263 USD including taxes and postage direct from Vicmarc, so about $70 less.
 
Roger Wiegand said:
Per

Perhaps you didn't change the currency from Australian to US dollars? The one (VM120 no jaws) I just bought was $332 from Craft Supplies and $263 USD including taxes and postage direct from Vicmarc, so about $70 less.
Click to expand...
(Facepalm) you’re totally right. I just need to figure out which the right one is. I want to get one with an insert but not sure which is right
 
Indeed, the 120 would be pretty big on a 12" lathe (and it would eat up a chunk of the 21" length, too! ;-)
 
Timothy Allen said:
Indeed, the 120 would be pretty big on a 12" lathe (and it would eat up a chunk of the 21" length, too! ;-)
Click to expand...

I have VM90, 100 & 120 chucks (among others) but I only use the VM120 chucks with the larger 5" diameter jaws and above (up to 8-3/4") for doing much larger and heavier work. The VM120 is a large chunk of heavy metal (just under 4kg) that would be unnecessarily large and heavy on a smaller lathe, IMO.

Also, keep in mind that the jaw sets for the VM90 and VM100 chucks are not compatible.
 
Status
Not open for further replies.
Back
Top