• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Peter Jacobson for "Red Winged Burl Bowl" being selected as Turning of the Week for April 29, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
maple with acrylic
Eucalyptus Gum (view 2)
Red Canarywood plate
Cherry Burl
maple with acrylic
Greek Key #3
Afrormosia plate
Bubinga plate
C

maple with acrylic

this is a piece it is maple i turned it and then drilled 1/2 "holes and then glued in pieces of colored acrylic rod
finished with tru-oil
Click to expand...
Jeff Jilg
Interesting effect. Did you turn the acrylic rod while it was glued into the holes? It came out pretty smooth looking.
 
C
the piece was rough turned alcohol dried turned again and left with a thick rim.
i then marked and drilled the holes and epoxyed the acrylic in and then finished turned once dry

the out side rim was sanded to 12000 to remove the scratched from the acrylic
 

Media information

Category
Member Galleries
Added by
cjrolke
Date added
View count
4,523
Comment count
4
Rating
0.00 star(s) 0 ratings

Image metadata

Device
SONY CYBERSHOT
Aperture
ƒ/2.2
Focal length
16.6 mm
Exposure time
1/80 second(s)
ISO
100
Filename
518DSC04814.JPG
File size
39 KB
Date taken
Mon, 27 February 2006 8:47 PM
Dimensions
800px x 600px

Share this media

Back
Top