I’ve had mine for quite a while now and wouldn’t be without it. Just wondering if anyone else on here has one?
-
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Jim Hills for "Journey II" being selected as Turning of the Week for May 6th, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Axminster Ultimate Edge
- Thread starter Bill Alston
- Start date
Bill, likely no one in the USA as there is notice that they can’t ship this product to the USA and don’t offer 110V. I didn’t even know Axminister made this. I do have the Sorby ProEdge that is just about the same. I like it for scrapers, skews, and roughing gouges much better than a platform and a wheel . The Sorby wants way too much protrusion for bowl gouges and spindle gouges. I have the Hannes Vector Jig for gouges.
Link to the Axminster Ultimate Edge similar to the Sorby ProEdge
www.axminstertools.com
Link to the Axminster Ultimate Edge similar to the Sorby ProEdge
Axminster Professional Ultimate Edge V/Speed Sharpening System - 230V
Woodwork without a keen edge simply ends up in tears. The Axminster Professional AP50UE Ultimate Edge offers a controlled, repeatable and effective method for sharpening, linishing or polishing on all your edge tools. No one takes up sharpening as a...
www.axminstertools.com
Ah, ok. I was unaware it was unavailable in the US. I have used and recommended the Sorby machine in the past. When Axminster brought out two belt sharpening machines I was quite intrigued at the differences. Axminster discontinued the basic machine some years ago, only the Ultimate Edge remains.
It has some significant differences with the Sorby, such as variable speed and forward and reverse. It also has a 12mm support bar so that Tormek jigs can be used on it. I use it for all my tools including bowl and spindle gouges. It also gets used for some of my HSS metal turning tools as well. I put an edge on a small axe with it a while back. I’ve just recently modified a small pigtail to fit it for abrasive and polishing mops. Most of the jigs I use are shop made. I like the Tormek jigs but they can be a bit pricey.
It has some significant differences with the Sorby, such as variable speed and forward and reverse. It also has a 12mm support bar so that Tormek jigs can be used on it. I use it for all my tools including bowl and spindle gouges. It also gets used for some of my HSS metal turning tools as well. I put an edge on a small axe with it a while back. I’ve just recently modified a small pigtail to fit it for abrasive and polishing mops. Most of the jigs I use are shop made. I like the Tormek jigs but they can be a bit pricey.