- Joined
- Apr 27, 2004
- Messages
- 8,671
- Likes
- 5,035
- Location
- Lakeland, Florida
- Website
- www.hockenberywoodturning.com
confusing!!!I misunderstood at first. This setup can be use in place of the Ellsworth jig or with it, depending
Excellent, thanks for sharing this.
If you use the Ellsworth jig. It works with the pivot point 4” below the center of wheel and 7” in front of the wheel
depending on the setup of your woulverine, The pocket of your woulverine will be 5.5“ Or so below the center of the wheel - too low for the Ellsworth Jig.