• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Jim Hills for "Journey II" being selected as Turning of the Week for May 6th, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Wine Bottle Stoppers
E

Wine Bottle Stoppers

Did these last week from East Indian Rosewood, Bubinga, Cocobolo, Bocote, and Beech. The stoppers are the stainless steel threaded ones from Ruth Niles and they are fantastic. I made the stand from Lexan. First time doing stoppers and I enjoyed it. It's nice to do some spindlework every now and then, helps work on my skills. All comments welcome.
Ed,
I just switched to the SS Niles hardware and my retail outlets are thrilled. I need to make new diplay racks. What size hole did you drill in the Lexan? I have been playing with the holes size and I must be too small.
Frank
PS: nice stoppers
 
Frank,
5/8" lets the lower O ring rest on top of the Lexan. I used a forstner at about 400 rpm so it did not burn or smell. Some sligh cleanup with an Xacto around the edges afterwards. good luck
 

Media information

Category
Member Galleries
Added by
Ed Kelle
Date added
View count
4,963
Comment count
4
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON E4500
Aperture
ƒ/8.5
Focal length
18.7 mm
Exposure time
1/8 second(s)
ISO
100
Flash
Off, did not fire
Filename
1122winestoppers.jpg
File size
42.5 KB
Date taken
Sat, 18 November 2006 4:17 PM
Dimensions
545px x 409px

Share this media

Back
Top