• August 2025 Turning Challenge: Wooden Version of Non-Wood Item! (click here for details)
  • Congratulations to David Croxton for "XOXOXO" being selected as Turning of the Week for August 11, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Big Poplar bowl

Joined
Sep 12, 2017
Messages
958
Likes
1,375
Location
Marietta, Georgia
2D35D551-5034-47D2-B350-E4719CB231D4.jpeg I got that poplar bowl done that I was using the cabinet scraper on. I had built a flat plate vacuum chuck with 2mm craft foam as a seal and got to experience the joy of vacuum chucking. Only needed about 7” vacuum to hold the bowl very securely. I finished it with three coats of Osmo finish.
 
View attachment 25492 I got that poplar bowl done that I was using the cabinet scraper on. I had built a flat plate vacuum chuck with 2mm craft foam as a seal and got to experience the joy of vacuum chucking. Only needed about 7” vacuum to hold the bowl very securely. I finished it with three coats of Osmo finish.

Beautiful bowl. I never imagined that poplar could look so nice.
 
Very nice bowl. You captured the contrasting grain colors to complement each other. BTW, the wine glass shows you have visited our fair state. Don't indulge any more but wineries and craft breweries are a big thing here now.
 
Ruth's Chris Steakhouse??? Wife checked into one that opened a few years ago. Two of us would have a tab of $150. That buys a lot of groceries....or a couple of turning tools.
Again, like the bowl!
 
Back
Top