• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • April 2026 Turning Challenge: Salad Bowl! (click here for details)
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Gianni Di Gregorio for "Simple Piercing" being selected as Turning of the Week for April 20, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Dream shop

With my dream shop it was designed without consideration to machine locations. A drive-in garage door along one wall and 120/240 conduit exposed along all walls at about 6 foot intervals. Same with air lines everywhere. There was a first attempt at machine locations, but over time we let machine locations be determined by what proved to be the most efficient. This was not a hobby shop, I had employees for my business.
 
Doug Rasmussen said:
With my dream shop it was designed without consideration to machine locations. A drive-in garage door along one wall and 120/240 conduit exposed along all walls at about 6 foot intervals. Same with air lines everywhere. There was a first attempt at machine locations, but over time we let machine locations be determined by what proved to be the most efficient. This was not a hobby shop, I had employees for my business.
Click to expand...
I did the same - 4 plug 120v outlets and 240v every 7 feet on the walls. I had the 240v wires heavy enough for 30amps just in case, although most of the machines I have are 20amp 240v.
 
You must log in or register to reply here.
Back
Top