• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • April 2026 Turning Challenge: Salad Bowl! (click here for details)
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Gianni Di Gregorio for "Simple Piercing" being selected as Turning of the Week for April 20, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Dust collector gates for 4” PVC pipes

Here is what I have used. Also had them installed at retirement home woodshop.

Long Ranger 4 in. Aluminum Blast Gate with Switch​

purchased at penn state industries
1776906826591.png
 
I have mostly Al blast gates and you have to wrap the gate with masking tape or a substitute till you get the right fit. Also you will want to drill the final fit and put a couple screws in to maintain the connection because it pops off somewhat easily with movement.
 
You must log in or register to reply here.
Back
Top