I thought I would see how it would work out doing a brick-type pattern with my bolt-on CNC. Working through some things, bit it is getting there.
-
Congratulations to Kevin Jesequel winner of the November 2024 Turning Challenge (click here for details) -
Congratulations to Clayton Thigpen for "Bradford Pear Jewelry Box" being selected as Turning of the Week for December 2, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
First try at brick pattern with the CNC
- Thread starter Paul Paukstelis
- Start date
Interesting. I did a quick test of a brick pattern the other week using my new router jig. I’m looking at making some more cutters to see what other effects I can get.
It is very clean. I'm cutting into the piece with an endmill so it is a bit fuzzy. I need to try out some downcut endmills as those should give better edges. I have figured out how to adjust the cutting depth to get different relief amounts.
I use a router cutter to make this type of pattern they are grooving cutters and come in various widths, I have 2mm, 3mm and 4mm.
My first test was done with a home made cutter, the bottom one. Just a piece of HSS in a turned silver steel holder.
