• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

For Sale WW Kodiak sharpening system

Status
Not open for further replies.
R

Raif Harik

Joined
Jan 14, 2020
Messages
332
Likes
135
Location
Austin, TX
Hi, I have the Woodturner Wonders Kodiak sharpening system. It is the whole kit, 1/2 HP Rikon grinder base ( base only no grinder ), the gouge jig, the platform, and two platform sliders. I purchased these when I started turning again a couple months ago. However, I ended up preferring just to use the platform for all sharpening. The jig works great, just like the Wolverine but with presets so you never have to set the angle. I just don't like using sharpening jigs it turns out. As I want a platform for both wheels, I decided to just get two robo-platforms and be done with it. Super simple.
With all the parts and accessories listed above the system cost $360 new. I'm asking $225 for the lot. All in like new condition.
Please let me know if you have any questions.
Sorry for the gigantic photos still have found an easy way to convert a bunch of photos.
Raif
Shipping will cost me around $25, but I will cover that cost. Read FREE SHIPPING! :)
my email is harik.raif@gmail.com
 

Attachments

  • IMG_20200422_181013.jpg
    IMG_20200422_181013.jpg
    484.9 KB · Views: 145
  • IMG_20200422_181026.jpg
    IMG_20200422_181026.jpg
    500.2 KB · Views: 150
  • IMG_20200422_181102.jpg
    IMG_20200422_181102.jpg
    528.3 KB · Views: 149
  • IMG_20200422_181113.jpg
    IMG_20200422_181113.jpg
    449.1 KB · Views: 140
  • IMG_20200422_181120.jpg
    IMG_20200422_181120.jpg
    505.4 KB · Views: 130
  • IMG_20200422_181132.jpg
    IMG_20200422_181132.jpg
    504.9 KB · Views: 119
  • IMG_20200422_181148.jpg
    IMG_20200422_181148.jpg
    479.4 KB · Views: 112
  • IMG_20200422_181214.jpg
    IMG_20200422_181214.jpg
    545.7 KB · Views: 105
Last edited:
I saw this set up at that last symposium, I was very impressed. Your pictures are just fine, good size. You might want to include an email. How about shipping? Can you fit this in a large flat rate box? This should sell fast! Aloha
 
Status
Not open for further replies.
Back
Top