I purchased an aluminum Hold Fast Spindle extender. When I installed it on my lathe with a chuck attached and turned on my lathe the chuck wobbled badly. Has anyone else had this kind of experience with this brand of spindle extender.
-
Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details) -
Congratulations to Paul Hedman and Donna Banfield for "Fire and Ice" being selected as Turning of the Week for 5 May, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Hold Fast Spindle Extender
- Thread starter Donald Lewis
- Start date
I suggest you take a short video and send it to Hold Fast. It doesn't make any difference that others have had success.
I'm not sure I would want an aluminum spindle extender. Oneway makes steel versions in several sizes and their machining is reliable in my experience. As Richard said, Holdfast should replace the one you have.
john lucas
AAW Forum Expert
I would suggest cleaning the mating surfaces of the extender and chuck abd try it again. If it still doesn't work call holdfast.