• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Jim Shuler

J

Jim Shuler

Joined
May 17, 2022
Messages
6
Likes
4
Location
Marshville, NC
Entering the turning world after 63 years.
Came across a neglected 1985 shopsmith lathe in a garage clean out. Spent about 10 hrs going slowly getting everything back up to snuff, cleaned lubed, adjusted.
Got the bandsaw, router, drum sander,
She runs good so now off to learning to turn wood. What to get into wood and resin turning as well.
So here to learn all I can
 
You must log in or register to reply here.
Back
Top