Lighting at the lathe....

[Odie]

I keep adding lamps, and better lighting sure does help. Since getting my new Vicmarc VL240 lathe last year, I now have 10 lamps at the lathe....and keep adding more as I go! I've never had this good of lighting before, and now seeing the quality of my cuts is easier than ever before!

=o=

 

[Alan Weinberg]

And lighting becomes even more important as the eyes age! 10 lights is sure a lot of lighting.

 

[Odie]

One of the most difficult places to get good lighting is outside of the rim at about the 9 o'clock position.....right where I'm cutting on the outermost portion of the rim.

I bought another lamp specifically for this location but was having a very hard time putting the lamp anywhere where it wasn't a problem during other phases of the bowl evolution.

This lamp was installed in several places where it became a problem, because it was always in the way and had to be moved.

The solution came when I stacked a bunch of magnets together to increase the hold. This allows me to place the lamp in a spot where it's never in the way, but the lamp easily swings into place when it's needed.....

When the lamp is needed, it swings into place where it's between myself and my work piece. This gives me the best lighting I've ever had for this particular need. Like so:

When the lamp isn't needed, it simply swings out of the way........problem solved!


=o=

 

[Odie]

10 lights is sure a lot of lighting.

That includes the two incandescent lamps that I used when I had the old Woodfast lathe. I use them, because I have them, and even though anything helps....these two aren't absolutely necessary.

The new LED lamps aren't used for all applications. Two are facing the back side of a mounted bowl, and three are pointing towards the interior of the bowl.....then there is the new "swing away" lamp that I just explained in the previous post....

The lamps are used as they are needed, but there isn't really any condition where all of them are needed at the same time.

All of the lamps are strategically placed in positions that require the least amount of adjustment during the course of making an average sized bowl.

=o=

 

[Ric Taylor]

Do the streetlights dim when you turn them all on?

I'm curious about what you said about stacking magnets to increase the hold. Can you give more details on that?

 

[John Torchick]

I just used an old desk lamp, adapted to a wall mount. Easily moved for best lighting.

 

[Curt Vogt]

More light at the lathe is just like more cowbell... give me more!

The downside to more lighting on your woodturning is that you can more easily see your mistakes.
The upside to more lighting on your woodturning is that you can more easily see your mistakes.

 

[Phil Hamel]

I stuck 2 four foot LED lights on the ceiling and have 2 magnet swivel lights for spots.