• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • April 2026 Turning Challenge: Salad Bowl! (click here for details)
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Gianni Di Gregorio for "Simple Piercing" being selected as Turning of the Week for April 20, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

McNaughton center saver

Status
Not open for further replies.
You can get a longer post (about 6"} from Craft Supplies for about $20 if you have a larger lathe such as a Robust AB or Oneway 2436. I got the longer post for my Robust, but actually the shorter post could be used for light duty coring.
 
Bill Boehme said:
You can get a longer post (about 6"} from Craft Supplies for about $20 if you have a larger lathe such as a Robust AB or Oneway 2436. I got the longer post for my Robust, but actually the shorter post could be used for light duty coring.
Click to expand...
I may have to my lathe is a powermatic 4224 ,
 
Status
Not open for further replies.
Back
Top