• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Misc lathe tooling for sale

Status
Not open for further replies.
Dean

Dean

Joined
Jul 17, 2010
Messages
109
Likes
40
Location
Waco, TX
Afternoon, I have a few things that I need to sell so someone else can make use of them. I will list below what I have and the price and send pictures as requested. Thank you

Oneway strong hold chuck used but in good condition. with std profiled jaws, #3 profiled jaw set, key and threaded stud. No insert. 250.00
Oneway tail stock swing away (very good condition) for 2000 series lathe 180.00
One way talon very light use near new condition w/ key, insert (1x8), std profile jaw, #2 smooth jaw(2573) and jumbo jaws (2047) 300.00
Monster hollowing system with lazer set up and all standard components and a kelton scraper. Mayo color made for a 2436.good condition 440.00
Robust 9inch mini confort rest (5/8 post fits jet midi and the like) 45.00
Craft supply screw chuck M33 25.00
Nova G3 direct thread 1x8 chuck with profiled std jaw set, key and stud 75.00 SOLD

If interested send email to 600n@radiomonkey.org
buyer pays shipping, I will find the best deal based on your requirements.
 
Last edited by a moderator:
Dean said:
Afternoon, I have a few things that I need to sell so someone else can make use of them. I will list below what I have and the price and send pictures as requested. Thank you

Oneway strong hold chuck used but in good condition. with std profiled jaws, #3 profiled jaw set, key and threaded stud. No insert. 250.00
Oneway tail stock swing away (very good condition) for 2000 series lathe 180.00
One way talon very light use near new condition w/ key, insert (1x8), std profile jaw, #2 smooth jaw(2573) and jumbo jaws (2047) 300.00
Monster hollowing system with lazer set up and all standard components and a kelton scraper. Mayo color made for a 2436.good condition 440.00
Robust 9inch mini confort rest (5/8 post fits jet midi and the like) 45.00
Craft supply screw chuck M33 25.00
Nova G3 direct thread 1x8 chuck with profiled std jaw set, key and stud 75.00 SOLD

If interested send email to 600n@radomonkey.org
buyer pays shipping, I will find the best deal based on your requirements.
Click to expand...
Is the screw Chuck the precision machine 3 and 1 ?
If so I would take it.
 
I’m sorry everyone. I did misspell my address it is radiomonkey as bill was kind enough to correct.
 
Morning folks, I will be listing this stuff on eBay and various other places so consider it off this market. If you do want something and it doesnt violate the rules of the listing site I will pull it for fellow turners. Contact me at 600n@radiomonkey.org this time I got it right.
 
Status
Not open for further replies.
Back
Top