• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Nova G3 lite chucks-All sold

Status
Not open for further replies.
Phil Hamel

Phil Hamel

Joined
Feb 7, 2023
Messages
723
Likes
5,527
Location
Gardner, MA
ALL SOLD

I have one Nova G3 lite chuck with direct thread 1x8. No insert. Comes with tool.
75 dollars includes shipping in the US.

These are bare chucks that I paid 120 dollars each new just about a year ago. My new machine is 1 1/4 x 8 so can't use these. I will sell for 80 dollars each plus shipping. Paypal preferred. Check or money order ok. Will sell individually.
Nova G3 lite.jpg
 
Last edited:
Phil Hamel said:
I have two Nova G3 lite chucks with direct thread 1x8. No insert. These are bare chucks that I paid 120 dollars each new just about a year ago. My new machine is 1 1/4 x 8 so can't use these. I will sell for 80 dollars each plus shipping. Paypal preferred. Check or money order ok. Will sell individually.
View attachment 70538
Click to expand...
Why not buy an adapter for the chucks and use them? I did that with one of my Nova G3 chucks, went from 1”x8 to 1-1/4 x 8 with no problems.
www.woodcraft.com

Teknatool Nova Spindle Adaptor - Female to Male

This Nova Spindle Adaptor provides a safe and cost-effective way to use your current chucks, faceplates and other accessories with other lathe spindles with different thread patterns and diameters.
www.woodcraft.com www.woodcraft.com
 

Attachments

  • IMG_1368.png
    IMG_1368.png
    554.5 KB · Views: 7
Last edited:
I agree with David. I have a Barracuda 2 chuck (old style with square drive) that gets some use with 17” Cole jaws. I bought the Penn State adapter years ago and it runs very true. A small chuck comes in handy some times

www.pennstateind.com

1-1/4 X 8 tpi to 1 in x 8tpi Headstock Spindle Adapter

Adapter From 1-1/4" x 8tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes.
www.pennstateind.com
 
William Rogers said:
I agree with David. I have a Barracuda 2 chuck (old style with square drive) that gets some use with 17” Cole jaws. I bought the Penn State adapter years ago and it runs very true. A small chuck comes in handy some times

www.pennstateind.com

1-1/4 X 8 tpi to 1 in x 8tpi Headstock Spindle Adapter

Adapter From 1-1/4" x 8tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes.
www.pennstateind.com
Click to expand...
I have 7 of them plus a record power SC2. Would rather sell.
 
Before I pass this info on to a new student, a question: does it include the chuck key shown in the corner of the photo?
 
John K Jordan said:
Before I pass this info on to a new student, a question: does it include the chuck key shown in the corner of the photo?
Click to expand...
No. That is a stock photo I got on the internet.
Edit-I went thru my box-o-crap and found two handles. So yes I will include one with each.
 
Last edited:
David Wyke said:
Why not buy an adapter for the chucks and use them? I did that with one of my Nova G3 chucks, went from 1”x8 to 1-1/4 x 8 with no problems.
www.woodcraft.com

Teknatool Nova Spindle Adaptor - Female to Male

This Nova Spindle Adaptor provides a safe and cost-effective way to use your current chucks, faceplates and other accessories with other lathe spindles with different thread patterns and diameters.
www.woodcraft.com www.woodcraft.com
Click to expand...
I did the same thing. Works very well.
 
Status
Not open for further replies.
Back
Top