• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

OneWay Big Bite Spur

Joined
Aug 6, 2009
Messages
694
Likes
498
Location
Lummi Island, WA
I use it in Oneway chucks, but as long as the space at the center of the four jaws is wide enough to accommodate the tang when the jaws are about 1/8" from closed it will work fine.
 
Joined
Dec 25, 2019
Messages
74
Likes
30
Location
Glen Spey, New York
I welded some (whatever thickness, can't remember) slats on the thin end of the mount side to fit into a Vicmarc chuck, works great for it now because I have a positive register on at least one side to center the spur into the chuck which enables a center for the point.
 
Back
Top