• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Chad Eames for "Red Tines" being selected as Turning of the Week for February 23, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Powermatic 3520A - excellent condition- $1800 / offer

Status
Not open for further replies.
M

Mike Bilan

Joined
Feb 24, 2020
Messages
6
Likes
3
Location
Bend, Oregon
THIS LATHE HAS BEEN SOLD.

Downsizing to a smaller lathe, so am selling my PM 3520A, purchased new in early 2002 from Woodcraft in Eugene, OR. Used very lightly as I've lived overseas since 2004- it was not used at all (but always stored inside) from 2004 - 2012, and only for occasional turning during summers since then. Besides the occasional paint chip it is in near perfect condition.

$1800 OBO

I have limited space in my garage-shop and I need a lathe with a smaller tailstock or the swing-away attachment as my back isn't what it used to be.

Comes with standard accessories- a new spur drive, live center, small faceplate, tool rest, mesh guard
 
Last edited:
Mike Bilan said:
Downsizing to a smaller lathe, so am selling my PM 3520A, purchased new in early 2002 from Woodcraft in Eugene, OR. Used very lightly as I've lived overseas since 2004- it was not used at all (but always stored inside) from 2004 - 2012, and only for occasional turning during summers since then. Besides the occasional paint chip it is in near perfect condition.

$1800 OBO

I have limited space in my garage-shop and I need a lathe with a smaller tailstock or the swing-away attachment as my back isn't what it used to be.

Comes with standard accessories- a new spur drive, live center, small faceplate, tool rest, mesh guard, and a 5 piece set of Pinnacle turning tools if sold by April 29.

If you are interested in a Kelton Hollowing Rig I would make a great deal for that with purchase of the lathe.

I would consider delivery within ~150 miles of Bend, OR or can meet part way. Let me know if you have any questions. mikebilan@yahoo View attachment 32964
Click to expand...
Do you still have the lathe for sale and are you in bend
 
Status
Not open for further replies.
Back
Top