- Joined
- Sep 11, 2005
- Messages
- 3
- Likes
- 0
Any 1 have a source for small orders 2-3 pc of 18" x 1.5" x .5" A11 or V10 steel or even M4. I can not find a source for small amounts of them. Any 1 want to go in on a ton of it...LOL.
Jim
Jim
-
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Peter Jacobson for "Red Winged Burl Bowl" being selected as Turning of the Week for April 29, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Source for A11/V10 Steel
- Thread starter Jim Dungan
- Start date
McMaster-Carr carries M4 vanadium and M42 moly alloys in both rods and square stock. Can't help you on the others.
You be sure of your bank balance before you call.
You be sure of your bank balance before you call.
I had heard that Crucible is the only source of V10. I could be wrong.
- Joined
- Jan 27, 2005
- Messages
- 12,900
- Likes
- 5,188
- Location
- Dalworthington Gardens, TX
- Website
- pbase.com
Check with Enco to see if they carry it.
Bill
Bill
Steve Worcester
Admin Emeritus
Crucible does indeed sell the V10. They will sell any quantities, but what they don't tell you is the handling charges. Also, the steel isn't precision ground. Mine came right off the saw.
CPM 10V, M4 and many other grades are available in small quantities from the Crucible warehouse in Arlington, TX (1-800-365-1168). They will cut basically any width or length in standard thicknesses (.09" and up), UPS to you and accept credit cards for payment. Normal minimum purchase is $75 and S&H is normally $10-12. Call them - they are a friendly group!
Grinding and Heat treating guidelines for all Crucible grades can be found at www.crucibleservice.com/eselector ...
Grinding and Heat treating guidelines for all Crucible grades can be found at www.crucibleservice.com/eselector ...