Source for A11/V10 Steel

[Jim Dungan]

Any 1 have a source for small orders 2-3 pc of 18" x 1.5" x .5" A11 or V10 steel or even M4. I can not find a source for small amounts of them. Any 1 want to go in on a ton of it...LOL.

Jim

 

[Mark Mandell]

McMaster-Carr carries M4 vanadium and M42 moly alloys in both rods and square stock. Can't help you on the others.

You be sure of your bank balance before you call.

 

[Martin Braun]

I had heard that Crucible is the only source of V10. I could be wrong.

 

[Bill Boehme]

Check with Enco to see if they carry it.

Bill

 

[Steve Worcester]

Crucible does indeed sell the V10. They will sell any quantities, but what they don't tell you is the handling charges. Also, the steel isn't precision ground. Mine came right off the saw.

 

[steelguy]

CPM 10V, M4 and many other grades are available in small quantities from the Crucible warehouse in Arlington, TX (1-800-365-1168). They will cut basically any width or length in standard thicknesses (.09" and up), UPS to you and accept credit cards for payment. Normal minimum purchase is $75 and S&H is normally $10-12. Call them - they are a friendly group!

Grinding and Heat treating guidelines for all Crucible grades can be found at www.crucibleservice.com/eselector ...

 

[ajohnson]

a11

I bought some a-11 from msc industrial supply Thier web site address is mscdirect.com.