• November 2025 Turning Challenge: Wall Hanging! (click here for details)
  • Congratulations to Craig Morton, People's Choice in the October 2025 Turning Challenge (click here for details)
  • Congratulations to Andy Chen for "Mesquite Vase with Polymer Clay Millefiori" being selected as Turning of the Week for November 3, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Vicmarc VM100 Standard Jaws

Status
Not open for further replies.
Scott Kershaw

Scott Kershaw

Joined
Oct 5, 2019
Messages
141
Likes
53
Location
Rio Rancho, NM
Website
www.cutthroatwoodworks.com
FOR SALE: Standard jaws (2" per CSUSA catalog) fitting a Vicmarc VM90/VM100 four-jaw chuck. Reference number is part no. V00657 on Vicmarc website. Size diagram borrowed from Vicmarc website for clarity. Jaws are lightly used showing light wear at the center where Sorby steb drive was used. Unfortunately, I don't have original packing. Selling as I have another set of VM100 standard jaws and will not use these. Included are eight (8) VM90/VM100 spare jaw screws (new, unused). Priced at $40 plus shipping. Please message here or email (kershaw.scott@gmail.com) with any concerns or questions.

Thank you,
Scott
 

Attachments

  • CAC17FFC-A995-4CB8-8B05-C4DFC23F4C14.jpeg
    CAC17FFC-A995-4CB8-8B05-C4DFC23F4C14.jpeg
    545.5 KB · Views: 7
  • V00657-1__63787.1465576316.jpg
    V00657-1__63787.1465576316.jpg
    8.8 KB · Views: 7
Status
Not open for further replies.
Back
Top