• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • April 2026 Turning Challenge: Salad Bowl! (click here for details)
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Gianni Di Gregorio for "Simple Piercing" being selected as Turning of the Week for April 20, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

WTB/WTT: Stuart Batty Grinding Platform Mounting Plate

Status
Not open for further replies.
J

Jake Hillestad

Joined
Oct 17, 2011
Messages
5
Likes
1
Location
WI
Looking for the mounting plate (part the platform mounts to and inserts into mounting base). I have a Oneway base adapter if you have a Wolverine system you'd like to use your platform with - even swap.

I'd also buy just your mounting plate if you already have the Oneway adapter.

Wouldn't have a problem buying an entire platform assembly either (2" wheel cutout preferred)

**What I have is on the left, what I need is on the right**

OotqAQI.png
 
I have the part bolts onto the platform (not the mounting base though) which you can have for free as I use mine in a Wolverine system but the shipping from Australia might make it too expensive. If you can't find something closer to you let me know.
Cheers
Josh
 
Status
Not open for further replies.
Back
Top